Alkaline Posted January 5, 2014 Report Share Posted January 5, 2014 Will do, hopefully they won't cause a YoungA-esque shitstorm. I doubt you installed them with a hacksaw and tried to solder them using your own shit. 2 Quote Link to comment Share on other sites More sharing options...
fat ol' sun Posted January 5, 2014 Report Share Posted January 5, 2014 Burns Mini Tri-Sonics So two of these pups. How are you fixed for switches, tone and volume pots - ie what's the layout, eg one switch, one vol, two tones?? You don't want parallel switching, what are your objectives function wise? If you are going to try some series switching or layout, wiring both grounds of each to the pot base is unlikely to be an option. Quote Link to comment Share on other sites More sharing options...
Surfer_Rosa Posted January 5, 2014 Report Share Posted January 5, 2014 So two of these pups. How are you fixed for switches, tone and volume pots - ie what's the layout, eg one switch, one vol, two tones??You don't want parallel switching, what are your objectives function wise?If you are going to try some series switching or layout, wiring both grounds of each to the pot base is unlikely to be an option.Sorry, said the wrong thing in my first comment. The wiring diagrams I'd found all had phase and on/off switches, like Brian May.The guitar is HSS and just has a 5-way switch, single tone and single volume. So I just want to keep it simple, no extra switches or anything. Just replace the existing single coils with these in the same setup, I just thought I'd check where the extra ground wires should go. Quote Link to comment Share on other sites More sharing options...
fat ol' sun Posted January 5, 2014 Report Share Posted January 5, 2014 Sorry, said the wrong thing in my first comment. The wiring diagrams I'd found all had phase and on/off switches, like Brian May. The guitar is HSS and just has a 5-way switch, single tone and single volume. So I just want to keep it simple, no extra switches or anything. Just replace the existing single coils with these in the same setup, I just thought I'd check where the extra ground wires should go. Yep, presuming conventional switching, you're good to solder the screen to ground (the vol pot case) and the "ref" or "cold" or "gnd" (what ever your diagram labels it) line to the pot case as well. Easier done with low melting point solder and a good high power iron. If I'm stating the fucking obvious, apols, but I tend to use newspaper with a hole torn in it to protect the guitar finish from possible solder spatter of splash. Hope it all goes well. Quote Link to comment Share on other sites More sharing options...
Stroopy121 Posted January 6, 2014 Report Share Posted January 6, 2014 Quote Link to comment Share on other sites More sharing options...
Little Green Posted January 6, 2014 Report Share Posted January 6, 2014 Anyone had any dealing ordering online from zavvi?I ordered something yesterday and got this email today:"Due to unforeseen circumstances have been unable to send your order asplanned. Payment has been taken as your order is ready for dispatch, andour team will complete your order as soon as we can. We are monitoringthe situation and will be in touch in the next few days with a furtherupdate. We understand that this may be frustrating, please accept our apologies.As a gesture of goodwill for any inconvenience we would like to provideyou with a 10% discount code for use on yournext order."I checked again now and it still says the item is in stock. Don't understand these unforseen circumstances. Am I getting my item or not? And surely if I'm not then I'd be entitled to a full refund not just 10% off my next purchase? Quote Link to comment Share on other sites More sharing options...
Teabags Posted January 6, 2014 Report Share Posted January 6, 2014 Quote Link to comment Share on other sites More sharing options...
colb Posted January 6, 2014 Report Share Posted January 6, 2014 Quote Link to comment Share on other sites More sharing options...
Lemonade Posted January 6, 2014 Report Share Posted January 6, 2014 I use US Netflix on my Xbox, all I do is manually change the DNS settings and it works. Quote Link to comment Share on other sites More sharing options...
Flights Posted January 6, 2014 Report Share Posted January 6, 2014 Yeah I just changed the DNS manually on Xbox like rathen and can confirm it works. Quote Link to comment Share on other sites More sharing options...
Jaaakkkeee Posted January 6, 2014 Report Share Posted January 6, 2014 This definitely works for ps3. And I used a chrome plug in for my laptop. Paying? Fuck that. I don't even pay for netflix. I use a friend's account. Quote Link to comment Share on other sites More sharing options...
Soda Jerk Posted January 6, 2014 Report Share Posted January 6, 2014 I haven't been able to use Netflix on Xbox for ages either. It worked for a month or two, and then stopped. It just sticks on the red screen now, and never loads. Quote Link to comment Share on other sites More sharing options...
Stroopy121 Posted January 6, 2014 Report Share Posted January 6, 2014 Yeah - I got it working. Took a few different attempts and different DNS settings but it's ALLLIIIIIVVVEEEEE. Awesome sauce. xx Quote Link to comment Share on other sites More sharing options...
Jaaakkkeee Posted January 6, 2014 Report Share Posted January 6, 2014 I haven't been able to use Netflix on Xbox for ages either. It worked for a month or two, and then stopped. It just sticks on the red screen now, and never loads. Yeah - I got it working. Took a few different attempts and different DNS settings but it's ALLLIIIIIVVVEEEEE. Awesome sauce. xxMost youtube videos with DNS settings always have the "new working dec 13" or whatever in the title because you do need to change them every so often. Quote Link to comment Share on other sites More sharing options...
Lemonade Posted January 6, 2014 Report Share Posted January 6, 2014 I've been using the same ones since the spring with no problems, they are on a wee but of a go-slow this last week but I've just changed my broadband provider (and also changed my xbox from wired to wireless) so that may be part of it. Quote Link to comment Share on other sites More sharing options...
Jaaakkkeee Posted January 6, 2014 Report Share Posted January 6, 2014 I've been using the same ones since the spring with no problems, they are on a wee but of a go-slow this last week but I've just changed my broadband provider (and also changed my xbox from wired to wireless) so that may be part of it.i think you can get lucky, and equally unlucky. sometimes. Quote Link to comment Share on other sites More sharing options...
Little Green Posted January 7, 2014 Report Share Posted January 7, 2014 Anyone ordered online from cex? How fast are they bat dispatching? Quote Link to comment Share on other sites More sharing options...
Jaaakkkeee Posted January 7, 2014 Report Share Posted January 7, 2014 How does light travel through space if it's a vacuum? Quote Link to comment Share on other sites More sharing options...
Flights Posted January 7, 2014 Report Share Posted January 7, 2014 How does light travel through space if it's a vacuum? Naturally, light can travel through vacuum because it consists of no charge. As a result, light does not need any vacuum to move from one place to the next as other moving materials do. This theory was discovered by the legendary physicist, Albert Einstein. 1 Quote Link to comment Share on other sites More sharing options...
Teabags Posted January 7, 2014 Report Share Posted January 7, 2014 You stole that from the internet. Thief. 1 Quote Link to comment Share on other sites More sharing options...
Woodsinho Posted January 7, 2014 Report Share Posted January 7, 2014 Light/electromagnetic radiation in general can travel through a vacuum because it is produced by energy from electric/magnetic fields so it doesn't require any physical medium like an atmosphere or a steak in the same way that sound does. 1 Quote Link to comment Share on other sites More sharing options...
Flights Posted January 7, 2014 Report Share Posted January 7, 2014 You stole that from the internet. Thief. What gave me away? Quote Link to comment Share on other sites More sharing options...
Teabags Posted January 7, 2014 Report Share Posted January 7, 2014 (edited) What gave me away?It was obvious, dude. Edited January 7, 2014 by Teabags 5 Quote Link to comment Share on other sites More sharing options...
Moon Moon Posted January 7, 2014 Report Share Posted January 7, 2014 Where's best for kilt hire? Next month the ceilidh band are doing a ceilidh night, me and my mate are going to be the only non - boring fucks in the band Quote Link to comment Share on other sites More sharing options...
Jaaakkkeee Posted January 7, 2014 Report Share Posted January 7, 2014 Naturally, light can travel through vacuum because it consists of no charge. As a result, light does not need any vacuum to move from one place to the next as other moving materials do. This theory was discovered by the legendary physicist, Albert Einstein. Light/electromagnetic radiation in general can travel through a vacuum because it is produced by energy from electric/magnetic fields so it doesn't require any physical medium like an atmosphere or a steak in the same way that sound does.Cheers. So is the heat generated by the sun radiation then? As I type this I know how stupid it sounds, but, aye. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.