Mick Maverik Posted July 14, 2005 Report Share Posted July 14, 2005 Exactly how much do you need to gig live? I am torn between getting a 50 watt and saving a bit cash, or shelling out a little more for extra head room? Any advice? I'm referring to combos btwAndy Quote Link to comment Share on other sites More sharing options...
the_beastly_one Posted July 14, 2005 Report Share Posted July 14, 2005 I'm not exactly an expert on this, but I know it would make a huge difference whether you're playing valve or solid state. Valve amps require a much lower wattage, maybe 60-70 to get the same volume as say, a 120W transistor amp. Quote Link to comment Share on other sites More sharing options...
Daniel Posted July 14, 2005 Report Share Posted July 14, 2005 Exactly how much do you need to gig live? I am torn between getting a 50 watt and saving a bit cash' date=' or shelling out a little more for extra head room? Any advice? I'm referring to combos btwAndy[/quote']i reckon you could play most venues with PAs with a 15 watt amp, i played kef with a 30 watt Quote Link to comment Share on other sites More sharing options...
GraemeC Posted July 14, 2005 Report Share Posted July 14, 2005 A 50 watt valve combo would take the windows out of most medium sized venues at half volume. Quote Link to comment Share on other sites More sharing options...
Guest Bailz Posted July 14, 2005 Report Share Posted July 14, 2005 Headroom doesn't refer to power my friend. Quote Link to comment Share on other sites More sharing options...
Leckie Gilman Posted July 14, 2005 Report Share Posted July 14, 2005 If there's a PA it doesn't really matter THAT much to the volume but like smaller amps do sound cack.One time Aaron used Jason's "hardcore max" 15 watt Laney beast in Gilman and it was fine with a PA. Quote Link to comment Share on other sites More sharing options...
Tav Posted July 14, 2005 Report Share Posted July 14, 2005 DSL50 is pretty crazy when up at around 6 so if anything you want less than that. Some 50watt valve amps after 1/2 or 1/4 power switches. Taking Aberdeen as an example Drakes would have been where you need more power due to there being no PA. The DSL401 I recommended has 40watts of power and even through 1 speaker is very loud when cranked up...through a 4x12" it'd be more than enough for any venue. Quote Link to comment Share on other sites More sharing options...
NARC Posted July 14, 2005 Report Share Posted July 14, 2005 40/50 watt valve is more than enough. As people have said though, it depends on whether you are micing your amp up or not. Quote Link to comment Share on other sites More sharing options...
David Posted July 14, 2005 Report Share Posted July 14, 2005 i have a Marshall DSL401 which is a 40 watt 1x12 valve combo, it was more than loud enough for playing in kef, and should cope fine at somewhere like dr drakes (ie a small venue unmic'ed)basically anywhere that needs more volume than that can give you should definately have a paif you are playing with a transister amp, 100watts+ should be fine, i used a Marshall AVT100 in drakes and it did fineDavid Quote Link to comment Share on other sites More sharing options...
soundian Posted July 14, 2005 Report Share Posted July 14, 2005 If there is a PA and your amp is getting miked (I think that's why the dictionary calls it miked, Flash, miced is too weird), you should only use your amp for tone. If you need more tone but it's too loud, get a powerbrake or similar (one of the best AC30 sounds I ever heard was through a powerbreak, but it trashes your valves). Drummers, the drum hasn't just raped your sister, neither have the cymbals. There's a difference between confidence and brutality, and the latter is never cool. In summary, get the sound you want at a level where it doesn't leave your ears ringing, anything more is madnesWHEEEEEEEEE. Quote Link to comment Share on other sites More sharing options...
Alkaline Posted July 14, 2005 Report Share Posted July 14, 2005 Drummers' date=' the drum hasn't just raped your sister, neither have the cymbals. [/quote']That is pure gold. Quote Link to comment Share on other sites More sharing options...
threeornothing Posted July 15, 2005 Report Share Posted July 15, 2005 Thats ripped (or raped?) from Mixerman Heh wattage for gigs, its a funny one, I remember back in my early days of gigging, the 8080 valvestate was the combo I would always borrow (and long to own..) and it was never loud enough....on Eradicate's tours we had a 100w valvestate head and 4x12 cab, and blew it on both tours due to the volume I needed it to be at (we had one of the loudest drummers in Aberdeen, he;s slacking up these days though!). I near bankrupt myself buying a new 100w valve amp and 4x12 cab, dream come true...and no venue has let me get it passed fucking 2...I always get the thing fucking screaming at practice, and used to crank it out at 6 at my old house for shits and giggles (the windows are still perfectly intact!)I guess I'm just a fan of the old days....can you imagine a sound engineer asking Hendrix or Townshend to turn down But yeah, you can get by with shitty amps...look at the La's playing T in the park, I'm sure they were taking the piss...but it has to be said, I get a lot of confidence in my singing when I'm almost drowning out my voice with a heavy guitar sound behind me, when I can't get that live, its always a shit gig....but thats just me...its never too loud, you're too old... Quote Link to comment Share on other sites More sharing options...
The Milner Posted July 15, 2005 Report Share Posted July 15, 2005 your right.....ian is getting too old. Quote Link to comment Share on other sites More sharing options...
Guest Gregor Ascension Posted July 15, 2005 Report Share Posted July 15, 2005 the wattage of an amp has nothig to do with how loud it is, at best it is a ball park figure. I used to gig all the time with a Mershall mg30w combo, it was shit, but was more than sufficient for most venues in aberdeen. Quote Link to comment Share on other sites More sharing options...
Hog Posted July 15, 2005 Report Share Posted July 15, 2005 Certainly all the main places in Aberdeen now mike an amp, Moorings, Tunnels, Moshulu, Kef. Sounds like a smaller wattage will suffice Quote Link to comment Share on other sites More sharing options...
Flash@TMB Posted July 15, 2005 Report Share Posted July 15, 2005 Assuming guitar amps as opposed to bass amps.As a ballpark then a 50W valve amp would produce more than enough. For transistors you'd be look at upwards of 90W. IMO - the best solution (provided you can afford it) is a ~100W valve head with a suitable powerbrake (recommend Marshall) and a stereo 4x12" angle cab. This would enable you to produce your desired sound(s) at pretty much any volume regardless of whether a PA is involved or not. It would also keep the sound engineer happy. The stereo cab gives you the option to output through 2 speakers or all 4 speakers depending on the size of the stage and whether or not you are going through a PA, and how much stage volume you require offset against the signal strength the sound engineer requires for a good signal to noise ratio. The angle cab helps direct the sound towards your ears assuming that you are going to be much closer to it than the crowd. In the event that you are standing within 15 feet of the cab then you should consider raising it 12"-18" off the deck... unless you are extremely short or have lost your legs in some horrific accident.Try and go for the most versitile head available. Quote Link to comment Share on other sites More sharing options...
Mick Maverik Posted July 15, 2005 Author Report Share Posted July 15, 2005 Assuming guitar amps as opposed to bass amps.As a ballpark then a 50W valve amp would produce more than enough. For transistors you'd be look at upwards of 90W. IMO - the best solution (provided you can afford it) is a ~100W valve head with a suitable powerbrake (recommend Marshall) and a stereo 4x12" angle cab. This would enable you to produce your desired sound(s) at pretty much any volume regardless of whether a PA is involved or not. It would also keep the sound engineer happy. The stereo cab gives you the option to output through 2 speakers or all 4 speakers depending on the size of the stage and whether or not you are going through a PA' date=' and how much stage volume you require offset against the signal strength the sound engineer requires for a good signal to noise ratio. The angle cab helps direct the sound towards your ears assuming that you are going to be much closer to it than the crowd. In the event that you are standing within 15 feet of the cab then you should consider raising it 12"-18" off the deck... unless you are extremely short or have lost your legs in some horrific accident.Try and go for the most versitile head available.[/quote']Would, but don't have the funds. I think at the moment, am seriously considering a Vox AD100 Valvetronix. They seem to sound quite nice and seem very versatile with the option of adding an additional speaker. One guy has praised them already. Anybody else have one? Pros and cons if you could?Andy Quote Link to comment Share on other sites More sharing options...
soundian Posted July 16, 2005 Report Share Posted July 16, 2005 Thats ripped (or raped?) from Mixerman I was using that line long before mixerman(EDIT: I'm sure I ripped it off someone else), although his chronicles are a delightful read. Blood on the turntables is a great watch as well. Caught the Stone Roses one the other night (again!), makes me wonder why anyone would want to be in this dirty, messy business! Jaded and cynical, not me Guv. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.