Monk Rocker Posted April 4, 2011 Report Share Posted April 4, 2011 I have a problem with my Marshall DSL401. It's become very noisy. It's basically a metallic sounding noise, sometimes crackly. When I tilt the amp forward it disappears and it's not really affected by volume. Was thinking it might be something to do with the reverb? Any ideas? Can I easily disconnect the reverb to see if that's the issue?Thanks for any advice!! Quote Link to comment Share on other sites More sharing options...
triggs Posted April 4, 2011 Report Share Posted April 4, 2011 dennis marshallthe man you need Quote Link to comment Share on other sites More sharing options...
Thecorporal Posted April 28, 2011 Report Share Posted April 28, 2011 I've got one, the reverb is connected by 2 rca jacks inside the amp. If you take off the back grill and look inside you will see the valves. On the right hand side there are some small Ecc83s. The jack runs up to the right of the 1st one near the transformer. You might find that the screws have come loose and its lifting off the base of the amp, especially if you've upgraded the speaker, beefier magnets can rip the screws which hold the tank down out the wood over time. Quote Link to comment Share on other sites More sharing options...
Monk Rocker Posted April 28, 2011 Author Report Share Posted April 28, 2011 Thank you - problem solved!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.