Jump to content
aberdeen-music

Bass Rig For Sale


Guest texjamm

Recommended Posts

Guest texjamm

Time for a change out I think......so I'm selling my bass amp. Its "pre-Fender owned" SWR Proffesional Series bass rig in excellent condition. Gives you a wide range of tones from dub reggae to tinny 'n' twangy! Heres the info:

SWR SM500 amp - 500w into 4 ohm, stereo / bridged mono, pre/power amp -

Spec - http://www.swrsound.com/products/search.php?partno=4400300000

Price new - http://www.electromusic.co.uk/bassguitars/en-gb/dept_424.html

SWR Goliath III - 4 x 10" plus horn, 700w RMS, 8 ohm c/w with SWR cover, speaker cable and castors -

Spec - http://www.swrsound.com/products/search.php?partno=4410500800

Price new - http://www.thomann.de/thoiw2_swr_goliath_iii_prodinfo.html?partner_id=79570

SWR Son Of Bertha - 1 x 15" plus horn, 350w RMS, 8 ohm c/w with SWR cover and speaker cable

Spec - http://www.swrsound.com/products/search.php?partno=4410900000

Price new - http://www.thomann.de/thoiw2_swr_son_of_bertha_prodinfo.html

I'd prefer to sell as one lot but may be persueded to split. To buy this little lot in the shops would set you back 2,200 I am looking for only 1,350 ono. Try outs can be arranged. If your interested drop me a line.

Cheers,

Mike

Link to comment
Share on other sites

Guest texjamm
How much for the 4x10 on it's own?

what are you gonna be replacing it with?

IF I decide to split the happy family up I would be looking for:

SM500 = 620

Goliath III = 430

Bertha = 300

I have replaced the cabs with a Schroeder 410, the SM500 will change out for a QSC PLX1602 and I have a JoeMeek pre-amp / compressor. Maybe get a Sansamp RBI instead.

Mike

Link to comment
Share on other sites

Another Wise Bassman

Texjam,

You made a wise decision when electing to switch to a Schroeder/QSC set up. .

I changed over from a Warwick Terminator 1000w cab ( 2x15" bandpass and 2x10" with horn ) and Warwick then EBS top of the range bass amp, to a Schroeder 310212 driven by a QSC PL 2400 and Ampeg SVTPro pre-amp. The Schroeder set up just kicks arse.

The tone thru the entire range is full and the bottom end is trouser flapping to say the least. Guitar is a Warwick Streamer 4 string thru neck circa 1996.

Happy playing.

SWR is a good set up and I can't imagine you should have trouble selling.

Mike

Link to comment
Share on other sites

Guest texjamm
Texjam' date='

You made a wise decision when electing to switch to a Schroeder/QSC set up. .

I changed over from a Warwick Terminator 1000w cab ( 2x15" bandpass and 2x10" with horn ) and Warwick then EBS top of the range bass amp, to a Schroeder 310212 driven by a QSC PL 2400 and Ampeg SVTPro pre-amp. The Schroeder set up just kicks arse.

The tone thru the entire range is full and the bottom end is trouser flapping to say the least. Guitar is a Warwick Streamer 4 string thru neck circa 1996.

Happy playing.

SWR is a good set up and I can't imagine you should have trouble selling.

Mike[/quote']

Mike, yup I was taking a keen interest in the cab at the Lemon Tree the other night. Sounded very good. I was initially looking to get a 310212 but got the 410 at a nice price.

Mike

Link to comment
Share on other sites

Lemon Tree Sound Left Me Flat

Mike,

Ah yes......the Lemon Tree gig. Quite frankly we were not overly impressed with the quality of the mix or overall sound from the venue system on that gig. The bass guitar was DI'd straight into the house desk and into the FOH mix so the Schroeder was used for stage monitoring only. All because of a bit of hissing ( typical of Ampeg pre-amps )

Our own PA Nexo/Turbosound kicks arse on the bottom end and in our view leaves the Lemon Tree FOH for dead. I used the Schroeder at Montrose and will also use it tonight at Newtonhill, and thru our system it is awesome.

Neil sends his regards.

Mike

Link to comment
Share on other sites

Guest texjamm
Mike' date=' you sell that to Dino and I'll hunt you down! I know he wants this but there's no room in the truck....[/quote']

Phew, lucky then that I've sold the SM500 and Goliath (pending payment!!). I can sleep easy now that my life is not in peril :up:

Only have the 1 x 15" for sale now.....any takers?

Link to comment
Share on other sites

  • 3 weeks later...
Guest
This topic is now closed to further replies.
×
×
  • Create New...