»

[Pint_paul]

hey,

i wana replace the grill cloth on my cab but i cant see how to get the old cloth out without ripping the fuker to bits (which i dont realy wana do)

does any one know how to to this?

cheers

[britheguy]

I've not done this with a 4x12, but I have with a 2x12. You need to take the back off then take the front out of the back of the cab if you know what I mean. There might be a few screws holding the front in place though, so these also need removed...from th eback.

I hope this helps you

[IamScrooge]

you'll need to basically disassemble the whole cab...and I'm not sure if you'll be able to salvage your marshall logo (the one I did had the logo broken already). Then once you've got the front panel, where the speakers are mounted, off, you'll see that the crillcloth is wrapped around the panel and stapled on.
Its not a big job but theres a lot of screws and most of them are at least 1.5" deep.
Remember how to wire up your speakers again, you can just pull the tabs off the terminals on the back of the drivers.

[Diesel]

Originally Posted by Pint_paul

hey,

i wana replace the grill cloth on my cab but i cant see how to get the old cloth out without ripping the fuker to bits (which i dont realy wana do)

does any one know how to to this?

cheers

Burn it, claim the insurance and buy mine

[Jeid]

I've hunted for hours for this. Don't say I'm a bad person. I done it this way and it's 100% spot on. Gives a good start to finish guide.

http://www.thegearpage.net/board/showthread.php?t=67452

Bear in mind that the piping for your cab will probably be fitted inside the cab. This is for a 1x12" cab, but the principle is still the same.

[Pint_paul]

cheers guys,

thts it done, and it looks fukin sweet

if u even cum see escape to victory ull see wot i mean, its fukin spot on, no longer just ur average marshall 4x12


cheers again

p.s. u realy selling a marshall 4x12? if so how much, a second one would never go a miss

[IamScrooge]

Originally Posted by Pint_paul

p.s. u realy selling a marshall 4x12? if so how much, a second one would never go a miss

Check the trading post forums:
Marshall 4x12 JCM 800 Lead 4x12 "B" Cab For Sale

[Jeid]

Originally Posted by Pint_paul

cheers guys,

thts it done, and it looks fukin sweet

if u even cum see escape to victory ull see wot i mean, its fukin spot on, no longer just ur average marshall 4x12


cheers again

p.s. u realy selling a marshall 4x12? if so how much, a second one would never go a miss

Post a motherfuckin picture!